It is possible to change change KM in Volvo V60 cluster. Depend of what tool you have. Here are instructions and pinouts provided.
VOLVO V60 HC12
Connector 51 is required
VOLVO V60 HC12
Remove the instrument cluster and remove the back cover.
Solder from connector 51 the colors at the marked same color
Soldering points. Disconnect the conductor (pink arrow)
(PICTURES ON THE FOLLOWING)
Connect the plug to the Digiprog III odometer correction tool.
Select the program:
Car / Truck – VOLVO V60 HC12.
The Digiprog 3 v4.94 shows the old / wrong CM reading.
The new / correct KM stand program and ready.
After confirmation, the process is completed.
Solder all connections.
FINISHED.
VOLVO V60 V70 S80 MOD. 2002 H12 V2
Connector 51 is required
VOLVO V60 V70 S80 MODEL 2002 H12 V2
Remove the instrument cluster and remove the back cover.
Solder from connector 51 the colors at the marked same color
Soldering points.
Connect the plug to the Digiprog3 V4.94.
Select the program: Car / Truck – VOLVO V70 HC12 V2.
The Digiprog shows the old / wrong CM reading.
The new / correct KM stand program and ready.
After confirmation, the process is completed.
Solder all connections.
FINISHED.
Leave a Reply