Here is a guide to help you use Lonsdor K518ISE Key Programmer connect with your car:
For the OBD test cable, there are 3 connectors:
Connector 1: connect K518ISE OBD port;
Connector 2: connect KPROG adaptor
Connector 3: connect the vehicle OBD port]
Before using the device, you need to make sure well connection between the device and the
car. Please use the OBD cable to connect the device OBD port and the car OBD port as
below:
1. Auto key Programmer K518ISE main unit 2. OBD test cable 3. OBD II connector 4. Vehicle
Note：
1. The vehicle power supply has to meet the normal voltage limit, i.e. around DC 12V. 2. Make sure the red indicator is on(the 1st of the 3 color indicators on the left corner)
3. If it still can not work, please check the vehicle OBD port and related wire connections to
pinpoint the problem. 4. the KPROG adaptor is needed only when it is available for certain car series.
More Lonsdor K518ISE on CnAutotool.com Guide please check K518ISE User Manual
Leave a Reply