How to Program Cadillac key fob with GM Tech2 clone

This is an instruction on how to program key fob to 2007 Cadillac CTS-V using a GM Tech 2 scanner.

Model: 2007 Cadillac CTS-V
The process…here you go…

The key to be programmed

Insert the key and ignition on

The gm tech 2 scan tool power on

In the main menu, go to Diagnostics

Select model: 2007 Cadillac D (DN) CTS-V passenger car

Then go to Vehicle Control Systems

Read vehicle info
Engine type: (U) 6.0L V8 LS2

Go to Module Setup

Then Remote control door lock receiver

Program key fobs…

Two key fobs to be programmed

Tips of programming key fobs:
All key fobs must be programmed each time any one fob is programmed. To program,press and hold the LOCK and UNLOCK key fob buttons prompted by the car diagnostic scanner TECH 2. Programming takes 15-30 minutes….

Programmed complete and test it’s working.
Done!