How to Program Cadillac key fob with GM Tech2 clone

This is an instruction on how to program key fob to 2007 Cadillac CTS-V using a GM Tech 2 scanner.

Model: 2007 Cadillac CTS-V
The process…here you go…

The key to be programmed

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-1.jpg

Insert the key and ignition on

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-2.jpg

The gm tech 2 scan tool power on

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-3.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/24-4.jpg

In the main menu, go to Diagnostics

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-5.jpg

Select model: 2007 Cadillac D (DN) CTS-V passenger car

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-6.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/24-7.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/24-8.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/24-9.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/24-10.jpg

Then go to Vehicle Control Systems

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-11.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/24-12.jpg

Read vehicle info
Engine type: (U) 6.0L V8 LS2

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-13.jpg

Go to Module Setup

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-14.jpg
Then Remote control door lock receiver

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-15.jpg

Program key fobs…

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-16.jpg

Two key fobs to be programmed

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-17.jpg

Tips of programming key fobs:
All key fobs must be programmed each time any one fob is programmed. To program,press and hold the LOCK and UNLOCK key fob buttons prompted by the car diagnostic scanner TECH 2. Programming takes 15-30 minutes….

http://forobd2tool.com/wp-content/uploads/2017/06/13/24-18.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/13/24-19.jpg

Programmed complete and test it’s working.
Done!

Be the first to comment

Leave a Reply

Your email address will not be published.


*