Install Driver for VAS 5054A

After install ODIS, use USB cable connect VAS 5054A with car and laptop FROM Obd2tool.com. The laptop will automatically find the driver. This time need to note don’t open internet connection otherwise it will take long time to install drive or failed.
VAS 5054A With OKI Chip VW ODIS V3.0.1 Plus Dell D630 laptop ready to Use
When the VAS 5054A ODIS connect to laptop, the indicating lights will blink regularly ( if it does not connect to laptop, lights will blink regularly per second). Now you can find the device in DEVICE MANAGER.

vas 5054a odis 2.0 is a professional diagnostic tool for VW, Audi, Seat, Skoda.VAS 5054a supported functionsvas 5054a read and erase ECU fault codes, including Check Engine, ABS, SRS, transmission system, Radio, heating. ect. Turn the check engine light off.The following vehicle bus systems are supported: K line (ISO9141-2) High-speed CAN (ISO 11898-2) Low-speed CAN (ISO 11898-3) J1850 (SAE J1850)

Renault Can Clip V160 is available to use! Here are Renault Can Clip V160 download links and installation steps on Windows XP. Download and install to get a new experience with Renault CAN Clip diagnostic interface now!
High Quality Renault CAN Clip Diagnostic Interface With IBM X200T Laptop Full Set Ready To Use
How to Crack Renault Can Clip:
1). After Installation finish, DO NOT run your CLIP!!!
1st replace the original file (backup first your original RSRwin.exe) with the RSRwin.exe file in C:\CLIP_X91\Lib\Application\
2). Then run RSRwin.exe, choose “Register me now” and in the next window select “No”!
3). Use this Key for Registration:333DEF-111DEF-111DEF-222DEF-221DEF-000DEF, It will work until 31/12/2020 🙂
4). Recover the original RSRWin.exe
5). Run update 136

Be the first to comment

Leave a Reply

Your email address will not be published.


*