Lonsdor K518ISE Key Programmer another passed model: Toyota RAV4 2008 Smart key programming success- no working key, SKE-LT-DST40(94/D4) -94/D4 smart key emulator is required. Black: SKE-LT-DST40(94/D4) -Supports 94/D4 smart key Procedure: Connect Lonsdor K518 with vehicle via OBD socket Select Immobilizer->Toyota->Select from Type->All smart key lost->All key lost->Backup EEPROM This function can back up car eeprom Read More …
How to: read pin code from 8A Smart card key and add a smart key on a Hyundai Sonata 2018 using OBDSTAR X300 DP PLUS. Original key and new key to be programmed Procedure: Connect X300 DP PLUS with vehicle via OBD socket Select Diag Program->Hyundai->Hyundai v30.63->Read Pin Code->Read PinCode (8A Smart Card) Turn on Read More …
Discussion: DRB3 compatibility with Micropod II and VCI Pod. Car: 2004 Chrysler 300M Software: DRB3 Firmware: wiTech MicroPOD 2 and VCI Pod It is said that the MicroPOD II can run the enhanced DRB III emulator with WiTech App v16.04.12. However this app version might require to run online, connected to TechAuthority. If it does you’re Read More …
Look here: XTOOL X100 PAD2 is new FEM programming. Possible to use Xtool X100 PAD2 for FEM programming? Yes! FEM/BDC available Source: How it’s working with FEM? Not by OBD its need soldering and work on FEM/BDC box… many steps backup and write and recover and need simulation platform FEM system to work Can it read Read More …