Consult-3 Plus v83 v81 v75 for Nissan Download Free, 100% Tested

(12.2018) FREE download Nissan Consult 3 Plus latest version 83.11.00 and 81.11.00 software:

CONSULT 3 Plus v83.11.00:
https://mega.nz/#!D9ZRnaSL!Y6rksoTqF1rbpx2-tIvliYFN5RcQSb6s-WwKqBGByZI

CONSULT-3-Plus-1 CONSULT-3-Plus-2 CONSULT-3-Plus-3

CONSULT III Plus v81.11.00:
https://mega.nz/#!ukhgRSYJ!DXM22QAbQDo-b4Di9e6tyxy2SE4fKVogLmKCv6QzZUA

CONSULT-3-Plus-2

Nissan Consult3 old patch download free:
https://mega.nz/#!xY03WKhZ!V5iQs7OiI4Xl4OhNLWehbgac56uYEpSxaOKQy6NeweU

CONSULT-3-Plus-3

This is used for it cannot be patched with “C3PCheckLicense” file
Remove old patch and install Consult 3 here

Test: Consult 3 plus 83.11 does not work with j2534 PassThruSupport.04.04 devices, only API 05.00…… but Consult 3+ 81.11 no problem

Go back to version 75 if you want programming

Nissan Consult III plus v75 software download:
https://mega.nz/#!WYYmiQ6J!QDCblZBomUBfEkTUEHd9ZCHWzV0cUKM-_3fT0nW7scg

CSP Software Version : CSP V41.10
Programming Data Version : Plus_V75
Password: Not required

Installation tip:
Uninstall the firewall, antivirus software.
Install the Consult 3 plus V75.20 to the C drive in the “NTFS” format.

Security: use with relief, 100% tested with Consult 3 plus china clone!

Languages: English/ French/ German/ Spanish/ Italian/ Japanese/ Portuguese/Russian/ Finnish/ Greek/ Chinese(Simplified)/ Chinese(Traditional)
Vehicles: Nissan and Infiniti from 1996 to 2017
Programming: confirmed! ECU Programming without card

Kts570 working with Consult III plus:
Have to modified the INI.
[current_channel]
channel=0
[system_management]
access_mode=1
[device]
vi_device_name=J-box 2
[mode]
debug_mode=TRUE
debug_mode_vehicle_battery=TRUE
[vehicles]
tab_index=1

“tab_index=1” seems the key to make jbox2 especially. Another thing is that you don’t need change the name of Jbox2 folder to nissan_VI2. Just copy the name of device (in this case “J-Box 2″) and paste to the vi_device_name in INI file. so it gonna be vi_device_name-J-Box 2”. That is it. At the first time, I changed the name of the folder in regedit, and errors showed. Now, automatically consult3 recognized jbox2 and vin number now. Only DTC and clear codes were detected though so far. I did not dig deeper yet.

For KTS570, it is pretty much same as jbox2. The difference is that I wrote “tab_index=4” instead of ‘1’. You also need update the firmware through esi. Otherwise, consult3 did not recognize.

Be the first to comment

Leave a Reply

Your email address will not be published.


*