Lonsdor JLR IMMO Land Rover & Jaguar Key Tool Support Car Coverage

LONSDOR JLR IMMO Land Rover&Jaguar Key Tool released for Land Rover&Jaguar Key Programming. What car does Lonsdor JLR immo tool support? Obd2tool.com share as Lonsdor JLR immo Land Rover&Jaguar Key Programming tool car coverage as following. LONSDOR JLR IMMO Lonsdor JLR IMMO Land Rover & Jaguar Key Tool Support Car Coverage Jaguar Land Rover special anti-theft Read More …

How to change BMW VIN in FEMBDC with Yanhua Mini ACDP

Questions: How to change VIN in FEM with ACDP?  I have Yanhua Mini ACDP host and FEM/BDC authorization module. Solution: Yanhua Mini ACDP change VIN in FEM: Open FEM/BDC Function Scroll down the menu, select Write IMMO Data function If have working key, put the working key close to the emergency starting induction antenna to Read More …

CAR FANS C800 FAW J6 Truck Euro III Diagnostic Function Tested 100%

Tested successfully! Today, we professionals working for chinacardiags.com have tested CARFANS C800 heavy duty truck diagnostic tool. Here you go. Faw J6 truck Go to OBD II Scanner CAR FANS C800 FAW software Select Faw J6 Engine system Unit Pump Engine System Euro III Unit Pump Diesel Engine Oshiba Michiyoutsu Gas Drive FAW autonomous Read version Read Read More …

OBDSTAR X300 DP Plus Clone GM Opel Bosch BCM

This article show a guide on how to use OBDSTAR X300 DP PLUS to clone GM Opel Bosch BCM.You can copy the original ECU data,and then write the data into another same ECU hardware via X300 DP Plus,so that it can achieve the same function as the original ECU.Let’s jump right in! Procedure: Select “ECU Clone”==>GM Read More …

BMW E39 OBD diagnose with BMW ICOM scanner

Question: For my E39 I already have a D+KCAN cable and bmw scanner 1.4.0. I would like to have the option to access a wider range of models. For example the old models with ADS interface (e.g. E34 or E36) but also newer models. Does ADS work with ICOM Scanner? Most good adapters which support Read More …

Suzuki SDT-2 works with Ford VCM II clone

Is it possible to use a VCM 2 unit for Suzuki diagnosis with SDT 2? Yes! The basic steps – install IDS software in clean VM Windows 7 32 bit. – downgrade firmware to v2.1.119.19 -Mazda-V94 – install SDT SDT-II_soft_2140025 – in C:\Program Files\Bosch\VTX-VCI copy all files from “VCI Software (Ford-VCM-II)” to “VCI Software (6516-Suzuki)” and Read More …

How to Solve Vas5054a ODIS-E Error ODS8024E

Purpose: solve ODS8024E error in ODIS-Engineering 6.7.5 for 5054a head BY www.obd2tool.com Hardware: OKI VAS5054A unit, firmware version 1.20.37 Software: ODIS-S 3.1.3…works perfectly ODIS-E 6.7.5…get an error when select a module for flashing Operation system: running ODIS-E and ODIS-S natively on Windows 10 x64 Error message: “ODS8024E Infrastructure. Vehicle (EcuCom): An error occurred during communication Read More …

MaxiSys MS906 Functional Description

The Autel MaxiSYS MS906 is an advanced diagnostic device developed for customers looking for a tool with ultra-convenient and modern design while still delivering ultimate performance. Featuring the powerful Samsung Exynos 5260 6-core processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15), and an 8.0 inch LED capacitive touch screen, based on the Read More …