How Does a Car Code Reader Work?

14

Computer controls started to show up on cars in the late 1970s and early 1980s, and these systems rapidly grew in complexity. Even very early computer controls included basic “on board diagnostic” functionality, and these early, OEM-specific systems are collectively referred to as OBD-I. In 1995, for the 1996 model year, automakers around the world started transitioning toward the universal OBD-II standard, which has been in use ever since.

Both OBD-I and OBD-II systems work in essentially the same way, in that they monitor a variety of sensor inputs and outputs. If the system determines that anything is out of spec, it sets a “trouble code” that can be used in diagnostic procedures. Each code corresponds to a specific fault, and there are also different types of codes (i.e. hard, soft) that represent both ongoing and intermittent problems.

When a trouble code is set, a special indicator on the dashboard typically lights up.

This is the “malfunction indicator lamp” and it essentially just means that you can hook up a car code reader to see what the problem is. Of course, some codes won’t cause this light to turn on.

Every Obd ii scanner has some type of connector that can be used to retrieve codes. In OBD-I systems, it is sometimes possible to use this connector to check codes without a car code reader.

For instance, it’s possible to bridge GM’s ALDL connector and then examine the blinking check engine light to determine which codes have been set. In a similar fashion, codes can be read from OBD-I Chrysler vehicles by turning the ignition key on and off in a specific pattern.

In other OBD-I systems and all OBD-II systems, trouble codes are read by plugging a car code reader into the OBD connector. This allows the Auto code reader to interface with the car’s computer, pull the codes, and sometimes perform a few other basic functions.

Be the first to comment

Leave a Reply

Your email address will not be published.


*